
I6 EVO Series
Industrial SSD- I6 EVO 2.5″ SATA SSD
Features
- The latest 3D TLC technology
- Big Capacity: 64GB ~ 2TB
- High Reliability, High Endurance
- Low Power, Low Cost
- For cost sensitive applications
Indudisk industrial ssd 2.5” SATA SSD is a high capacity ,highly reliable ssd disk.They are ideal solutions for industrial embedded applications requiring reliable and long service life storage.
Indudisk 2.5″ SATA TLC SSD I6 Evo Series is designed based on the latest 3D TLC with focus on best TCO. It combines robust NAND controller hardware error correction capabilities with advanced wear-leveling algorithms, bad block management and industrial grade 3D TLC Nand Flash to improve data reliability and significantly extend the life of the SSD. It is an ideal storage solution for cost senstive application like ATM, digital signage and networking systems.
Specifications I6 EVO SERIES 2.5" SATAIII SSD
Physical | |||||||
Form Factor | 2.5″ SATA 7+15pin Connector | ||||||
Interface | SATAIII (SATAII and SATAI Compatible) | ||||||
Size | 100.2×69.85×7.0 mm | ||||||
Capcity | 128GB~2TB | ||||||
Flash Type | TLC | ||||||
Performance | |||||||
Sequential Read/Write | 550/450 MB/S | ||||||
Random IOPS Read/Write(4K) | 70K/70K MB/S SLC:55K/60K | ||||||
Access Time | <0.1ms | ||||||
Electrical | |||||||
Power Supply | 5V±5%(Max 1.5A) | ||||||
Power Consumption | Active: ≤6W Idle: ≤0.8W | ||||||
Temperature | |||||||
Operating Temperature | Wide Temp.:-40℃~85℃ Industrial temp.: -20℃~+70℃ Commercial Temp.:0℃~+70℃ | ||||||
Storage Temperature | (-55℃~+95℃) | ||||||
Environmental | |||||||
Vibration | 16.4G(10-2000Hz) | ||||||
Shock(Operating) | 1500G(0.5ms,Half sine wave) | ||||||
Humidity | 5%~95%(No Condensing) | ||||||
Reliability | |||||||
MTBF | 2000000hrs | ||||||
Data Retention(Max): | 10 Years@25℃ | ||||||
Special Functions | |||||||
Power Loss Protection(PLP) | √ | ||||||
Confromal Coating | √ | ||||||
Secure Erase | Optional | ||||||
Physical Destruction | Optional | ||||||
TRIM | √ | ||||||
S.M.A.R.T | √ | ||||||